Products

Magnaglo 14A Wet method fluorescent particles

Magnaglo 14A is a powder concentrate used to prepare fluorescent ink for wet method magnetic particle testing. The ink is used in conjunction with suitable magnetizing equipment for use in high sensitivity wet method magnetic particle inspection.
It is used to locate fine surface and slightly subsurface discontinuities such as: inclusions, seams, shrink cracks, tears, laps, flakes, welding defects, grinding cracks, quenching cracks, and fatigue cracks. 14A may be suspended in either a petroleum-based vehicle (oil) such as MAGNAFLUX MG Carrier II, or in water. When water is used as a vehicle, conditioning agents such as WA-2B, or WA-4E are required.
The conditioning agents improve particle suspendibility, mobility and surface wetting together with nominal corrosion inhibition.
Inks made from 14A give clear fluorescent green indications when viewed in a darkened area under UV(A) of peak wavelength 365nm.

Magnaglo 20B Water Suspendible Fluorescent Particles

Magnaglo 20B is a granular powder concentrate used to prepare aqueous fluorescent ink for wet method magnetic particle testing. The ink is used in conjunction with suitable magnetizing equipment for use in high sensitivity wet method magnetic particle inspection.
It can be used to locate fine surface and slightly subsurface discontinuities such as: inclusions, seams, shrink cracks, tears, laps, flakes, welding defects, grinding cracks, quenching cracks, and fatigue cracks. Inks made from 20B give clear fluorescent green indications when viewed in a darkened area under UV(A) of peak wavelength 365nm.

Magnaglo MG410 Wet method fluorescent particles

Magnaglo MG 410 is a powder concentrate used to prepare fluorescent ink for wet method magnetic particle testing. The ink is used in conjunction with suitable magnetizing equipment for use in general wet method magnetic particle inspection.
It is used to locate medium / fine surface and slightly subsurface discontinuities such as: inclusions, seams, shrink cracks, tears, laps, flakes, welding defects, grinding cracks, quenching cracks, and fatigue cracks. MG 410 may be suspended in either a petroleum-based vehicle (oil) such as MAGNAFLUX MG Carrier II, or in water. When water is used as a vehicle, conditioning agents such as WA-2B, or WA-4E are required. The conditioning agents improve particle suspendibility, mobility and surface wetting together with nominal corrosion inhibition.
Inks made from MG 410 give clear bright fluorescent green indications when viewed in a darkened area under UV(A) of peak wavelength 365nm. A totally darkened inspection area is not required due to the intense brightness of MG-410.

Magnaglo WB12 Water suspendible fluorescent particles

WB12 is a liquid concentrate used to prepare water based fluorescent ink for wet method magnetic particle testing.
The ink is used in conjunction with suitable magnetising equipment and UV(A) source to locate fine surface and slightly subsurface discontinuities in ferrous materials. Typical defects found include shrink cracks, welding defects, grinding cracks, quencing cracks and fatigue cracks.
Inks made from WB12 give clear bright yellow indications when viewed in darkened area under ultraviolet radiation (UV-A) of peak wavelength 365 nm.


More information here ...