Developer G 139. High-quality developer for automatic processors
G139 is an excellent three-part high-quality developer for high-end automatic processors.
G139 is a high-quality developer for high-end automatic processors. It is used for conventional blue and green radiography and for laser imaging films. G139 is Agfa's developer which performs well in all large 90 seconds to 2 minutes processors at temperatures ranging from 32 °C to 35 °C. The best results are obtained when combining G139 developer with G334i fixer.
G139S starter for a perfect start
We recommend the use of G139S starting solutions whenever you replace the developer in conventional applications. You will thus obtain X-ray images with optimal sensitometric properties for conventional blue and green radiography films and for laser imaging films.
Ecologically improved packaging
The G139 developer is supplied in shipping cartons made of 60 % recycled cardboard. The cartons have been provided with two handles for easy tilting and transportation. Parts A, B and C are packed in translucent polyethylene (PE) bottles fitted with PE ECO seals. The screw cap and the stripe at the top of the label are color-coded for identification purposes (red, transparent). The colored components, however, have been reduced as much as possible and the bottles show no aluminium remnants after use. Both features make the bottles easily PE-recyclable.
Easy bottle handling
You can easily open the bottles using the built-in cutting edges of the cap. Simply open the cap, place it upside down on the bottle, apply a little pressure and turn the cap clockwise to break the ECO seal.
Easy automatic mixing
You can easily mix the parts using the automatic mixing units. Remove the cap, invert the bottle with the ECO seal over the seal opener and press. The seal is automatically broken and the contents can flow into the tank on the mixing unit. Whatever the mixing procedure, automatic or manual, mixing will never result in sludge formation.